The Wounded Ghosts - Part 2

简介

After the success of The Wounded Ghosts I knew I'll make another set so here are the 4 new members! As previously these are all multi-part models so no AMS or any other multicolor printer is needed here - Just a little glue. Printing: You should enable automatic supports (tree/organic) for all ghosts - although not all of them require it. You should print all ghosts at 100% infill (yup) but lightning infill might also work - It will not save you more than a few grams though. The Medieval Axe ghost needs gentle push of the blood on the head - Don't force it just do it nice and slowly 🙂 You need to print 20 nails for "Nailed It" ghost - Pause the print where the bulge starts to color it red and then switch back to silver. The nails fit very lightly inside the holes - To avoid glue you might want to print them at approx. 105% but it really depends on the printer and settings. You will need some glue to put all the parts together but it's super easy. Scaling up is not a problem - Scaling down you need to watch for wall thickness. I might release more members but the next model which is almost done is something a little different. If you want to get access to all my models or sell my prints commercially, you can join my Thangs: https://thangs.com/designer/3DGeex And a kind request, Please help supporting the work of all 3D artists! Do not sell or share digital files bought here and on other sites. Buying this model DOES NOT allow you to sell physical copies of it, It is for…