Industrial Staircase

简介

File extensions : .stl Scale : 1/24 Dimensions (for 1/24) : Staircase : Height between the bottom of the staircase and the top of the highest step : 100 mm Total length : 133.5* mm Stairs angle from ground : 37.5° Width with stringers : 44 mm Treads : Number : 12 Height between two treads : 8.3* mm Length once assembled : 40 mm Width : 12.3 mm Thickness : 1.3 mm Guardrails : Height from floor : 39.2* mm Vertical posts thickness : 2 mm by 2 mm Horizontal posts thickness : 1 mm by 1 mm The measurements with a * are rounded. WARNING : The last six pictures do not correspond to the model for sale. This was the prototype but I preferred to take some photos anyway to show you what it could look like. (Files intended for model making) I think this model can be used in many dioramas. As I wrote above, the height of one step is about 8.3 mm, which corresponds to 20 cm in real life. Then, it’s designed to be printed with a filament printer, that's why it’s an assembly. I add small 0.2 mm gaps to make sure it can be assembled : the recesses in the stringers measure 12.5 mm by 1.5 mm. I advise you to glue it for more rigidity. I've included the left and right stringers but you can also mirror one of them directly into your slicer. Finally, I tried to add some useful guardrail models as you can see in the seventh picture. The spacing between the posts measures 50 mm but you can of course cut them after printing to fit your diorama.