Quadcopter Mount Bracket Adapter

Quadcopter Mount Bracket Adapter

免费 STL 数码配件
  • 16 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

This is a quick and dirty quadcopter mounting bracket for attaching a power distribution board or a flight controller such as the CC3D to a larger set of mounting holes - in the case where you want to use holes on both sides. The hole spacing is based on an EMAX Nighthawk 250 although should be fairly generic as the controllers all seem to use much of the same form factor. Dimensions: Inner Hole Spacing = 30.5mm. Outer Hole Spacing = 42mm. Screw Diameter = 3.5mm (for material shrinkage), use M3 bolts. Post Standoff = 3.5mm. Total Height (including Standoffs) = 6.5; Mount Plate = 51 x 51mm.

About this model

Quadcopter Mount Bracket Adapter is a 免费 3D model in the 数码配件 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型