简介
It is very tight and I recommend using a vise for the joint or a hammer on a consistent surface for such work and put a little wood so as not to hit the model directly. The diameter of the syringe is 21mm, and the actuator or handle is inclined for a more comfortable actuation, this device allows us to fill with flux, mask, grease, and facilitates the application with the ease of putting different accessories on the tip with different caliber. The rod is 3.8mm and we will need 3 nuts, which fit perfectly and for this we will use universal pliers , vise or a hammer. press fit all parts. UPDATED All models to complete the dispenser 20ml. the inside support was missing, thanks to DARIO420 who informed me.
About this model
Dispenser 20ml is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
