简介
Radius is 8cm, so you will need at least 51 cm of mesh, or you can print some kind of rail to hold ends of mesh and have smaller mesh 49cm. (I didn't provide model of rails, i didn't use that. I just use wire to weave mesh ends.) Distance is variable, but there is 5deegree slope and for stands it is designed to support 25cm mesh length. (I used 35cm mesh and added some paper under loader stand legs, when i mounted it.) You can use some wooden laths in the slots on sides, to get more stability. Parts required to complete this project: - 6mm shaft at least 400mm (https://www.amazon.de/-/en/dp/B0C5QKFKJD?psc=1&ref=ppxyo2ovdtbproductdetails) - 2 times 8x19x6 ball bearings. (https://www.amazon.de/-/en/dp/B07CRHM84X?psc=1&ref=ppxyo2ovdtbproductdetails) - 2 times shaft collar (https://www.amazon.de/-/en/dp/B0B1C4XX65/ref=twisterB0B1Q689RP?encoding=UTF8&th=1) - 2 times Shaft couplings (https://www.amazon.de/-/en/dp/B0B1C4XX65/ref=twisterB0B1Q689RP?encoding=UTF8&th=1) - 8 times M5 screws and nuts (the flatter the better) - 8 times M3 screws and nuts - At least 3 hot inserts for handle and screws for it (one longer screw + nut + knob) (https://www.tme.eu/sk/en/details/b4_bn1052/threaded-insertions/bossard/1386883/) - Mesh 51cm x 25cm Edit V2: New objects have been added, so you do not necessarily need to re-print anything. However, you will need to add some anchoring holes and heat-set inserts, or use wood screws, to secure the motor adapter to the old hopper base. For motor you can…
About this model
Rotary sieve V2 is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
