简介
Tactical rig for mac10. to equip your mac10 with accessories and gain in gaming comfort. Parts included: -Left+right body. -x2 front pins that fit into both bodies. -Armament lever to be installed on the original one. The front sight must be removed. A few drops of oil are recommended for the cocking lever to work properly. Screws and bolts: -M4x14mm screws x2 -Screw M4x18mm x2 -Nut M4 x4 You may need to use light sandpaper to adjust some parts to your printer's tolerances. Take care to clean all supports thoroughly. The model was designed on a Mac10 M11 GBB from HFC, I would not be held responsible for a compatibility problem on other models. airsoft #fakegun
About this model
mac10 tactical rig is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
