简介
Conversion of the Krampe tipper to electric cylinder, incl. flap opening mechanism. The box is installed between the axles, in which, for example, a controller and a small battery can be installed. Modifications to the Bruder vehicle: Frame: Here the bar must be gutted so that the straight middle section is removed. The gray attachment is located on the frame. The snap hooks protruding upwards must be removed. You can see these changes on picture (IMG20240111111001_705). I used Plastic Magic from Deluxe Materials to glue the parts that will be glued together. This welds the parts together. The cylinders are 12V 50mm actuators Here is a short video: https://youtu.be/K3wFSc1uq74?si=-xuKsskx44xu5qEG
About this model
Brother Krampe conversion is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
