简介
Update (2018-11-24): I've added a separate stl for the 'hole', easier to remix. Update (2018-08-30): I've added a hole for the camera slot. I've also made the snap-on a bit bigger, to make it sturdier. These are all in v2 of the two files. Yet another raspberry pi sleeve case remix. I wanted a case/sleeve that I can snap on or off but will not slide up or down. This case will easily come off if moved side to side, but is snug vertically, making it easy to plug or unplug usb cables. Turn 90 degrees to insert Align (second) clip using the sleeve, then twist to lock, using a long nose pliers helps. Snap on sleeve
About this model
Raspberry Pi Snap-on Sleeve is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
