简介
This spawning tube has been developed for catfish, gobies or dwarf cichlids in the aquarium hobby. This tube is scalable. In its original size, the spawning tube measures approx. 34 mm x 27 mm x 80 mm (WxHxD). If you have printed the spawning tube, you can heat it with a heat gun and flatten the entrance for catfish, for example. However, please be careful not to burn the material or yourself. The printed PLA is deformable under the influence of heat. Two small indentations with a diameter of 12 mm and a depth of 1.2 mm have been made in the underside of the spawning tube. Punched slugs or stainless steel washers can be glued in there with silicone if the spawning tube should not sink in the water. Or you can glue a small slate plate under the spawning tube. At the end of the spawning tube there is a 3 mm hole for ventilation so that no air collects in the spawning tube.
About this model
Spawning tube-4 for aquariums is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
