简介
NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON : https://www.patreon.com/PA1_MAKER Here's some extra storage for you folks! Nice, easy-to-print, stackable drawers. They are strong, open and close really well, and they don't sag even when opened 3/4 of their way. And with the way they are shaped (emboss on top/bottom) they are really stable. -No supports needed -Prusa mini compatible -All parts already placed in the right orientation -Design is made of individual parts. So no need for a multicolor printer. -Instructions included The larger parts are designed to have a total thickness of 1.6mm (4 3d printed walls) almost everywhere. So you have almost no infill in the entire design, only walls (except for the drawer face and the handle) and the way the parts are printed make the design really strong. The design is scalable, but i recommend not going under 50% when scaling down. The original size of one drawer is 160mm X 160mm. The only thing you need for the assembly is a little bit of your favorite glue. In any case, if you are having problems with the design, send me a message and i will try to help you as much as i can! Have fun!
About this model
EASY-TO-PRINT STACKABLE DRAWERS is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
