简介
Okay, final release. The v5 connector is nice and snug when you glue it to a piece of cardboard as the tile top. I can't wait to see what gets done with these, so please post your makes :) Glue a cardboard (or 3d printed) tile on top. Connector is 1mm narrower all the way around, but a little more than full height for the spacing. 4mm x 1mm holes in connector and tile base for magnets which may or may not be necessary or useful. These are oversized, 1.25" per "square" (4 squares per tile base) to make room for walls and such but still have room for 1" miniatures to fit in a square. You can scale down X and Y if you want to print 1" per square, but that will mean smaller magnets too. If the magnets are even useful... Square tile, 1/2 rectangle, 1/2 triangle, rounded corner, and rounded dead end. Print at 0.25 layer height. Credit for the idea goes to Michael over at http://project-saros.com
About this model
Tile base is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
