SS6 rail-mounted socket support

SS6 rail-mounted socket support

免费 STL 数码配件
  • 15 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

UPDATE (M4 BOLTS and RAIL LOCK) A holder for 4 CO2/Green Airsoft cartridge cases for horizontal rail mounting. Locking/opening mechanism. Protection against accidental impact on firing pins. The closing point must be drilled after fitting the cover. Foam will need to be placed under the cover to keep the bushes under pressure (low), and the last hole will only be drilled at this point (depending on the thickness of the foam). The photos are coming !!! Printing in ABS (PLA tested and OK at 100% infill). Speed 50mm/s. Requires a few M3, M5 nuts and bolts and a return spring. Good impression.

About this model

SS6 rail-mounted socket support is a 免费 3D model in the 数码配件 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型