简介
This project serves to have greater air extraction for machines with closure on three sides. You have to make the holes in the top cover as described in the pictures. Thread the holes on the covers M4 and you're done! The covers and fans are fixed from below with M4 screws. You can apply 4 fans 60 x 60 mm (the height of the fans can be 10 mm, 15 mm or 20 mm). An example of fans can be found here: https://www.amazon.it/dp/B07GX9P48F?ref=ppxyo2ovdtbproduct_details&th=1 The covers are made of PETG. Links for the complete box: SIDE CLOSURE: https://cults3d.com/en/3d-model/various/side-closure-for-the-printer-model-flsun-v400 FRONTAL CLOSURE: https://cults3d.com/en/3d-model/various/frontal-closure-for-flsun-v400
About this model
Fun Double Cover FLSUN V400 is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
