Trunks Dragon Ball Z Hueforge - dylan23
- 14 次浏览
该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。
在 Creality Cloud 查看 ↗简介
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size. You can resize X and Y axis but leave Z axis alone.You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.4mmFilaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2#e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.56mm) swap to YellowAt layer #10 (0.88mm) swap to BambuLab GreenAt layer #16 (1.36mm) swap to BlackAt layer #24 (2mm) swap to White for the rest.
About this model
Trunks Dragon Ball Z Hueforge - dylan23 is a 免费 3D model in the 动物与生物 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
