Fluid Diorama

Beschreibung

These are all the necessary 3d printed parts for fluid diorama video (https://youtu.be/zfBcJi0_oyY) The files includes a small test piece intended for a quick test fitting against your parts should you not confident with your 3d printer's settings and accuracy. Motor mounting inside the base is slightly larger by about 0.05-0.10mm, while switch mounting areas don't have any tolerance added into it. If the motor mounting is too loose, just use any piece of cellophane tape/plastic sheet to add it as a padding to make it fit. Bottom cap also has tolerance added into it to ensure smooth screw/unscrew action, so you don't have to adjust for this model. Do print the files from "Test Print" first and do a test fit so you know what do you have to adjust in the slicer's settings. BOM - FA-130 Motor or N20 Motor - Wires - Small THT Switch - Magnets - Nickel strips 8-10mm dimensions are shown in the video above.