Fluid Diorama

Ücretsiz STL Diğer

14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

These are all the necessary 3d printed parts for fluid diorama video (https://youtu.be/zfBcJi0_oyY) The files includes a small test piece intended for a quick test fitting against your parts should you not confident with your 3d printer's settings and accuracy. Motor mounting inside the base is slightly larger by about 0.05-0.10mm, while switch mounting areas don't have any tolerance added into it. If the motor mounting is too loose, just use any piece of cellophane tape/plastic sheet to add it as a padding to make it fit. Bottom cap also has tolerance added into it to ensure smooth screw/unscrew action, so you don't have to adjust for this model. Do print the files from "Test Print" first and do a test fit so you know what do you have to adjust in the slicer's settings. BOM - FA-130 Motor or N20 Motor - Wires - Small THT Switch - Magnets - Nickel strips 8-10mm dimensions are shown in the video above.

Bu model hakkında

Fluid Diorama, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.