Tiny NAS Case for Raspberry Pi Model A

Tiny NAS Case for Raspberry Pi Model A

Kostenlos STL Ordnung & Aufbewahrung
  • 19 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

This is one of my side projects to develop a carrier case for the Raspberry Pi Model A that runs the ArOZ Online System (Web Desktop for File Storage). Visit the following link to see my Web Desktop Platform designed for slower Pis over here: https://github.com/tobychui/ArOZ-Online-System Hardware Requirement Raspberry Pi Model A (Pi 1 Model A or Pi 3 Model A) USB2.0 to Ethernet Adapter SD card (For installing Raspbian / Raspberry Pi OS + Storage) You can purchase a USB to 2.1mm DC power cable for the 2.1mm DC jack or you can make good use of the remaining space behind the DC jack to put a build in voltage regulator that convert 12v power input to 5V and connects to the GPIO of the pi for powering. It is up to you :))

About this model

Tiny NAS Case for Raspberry Pi Model A is a kostenlos 3D model in the Ordnung & Aufbewahrung category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle