Tiny NAS Case for Raspberry Pi Model A

Tiny NAS Case for Raspberry Pi Model A

Ücretsiz STL Düzenleyici ve Saklama
  • 22 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This is one of my side projects to develop a carrier case for the Raspberry Pi Model A that runs the ArOZ Online System (Web Desktop for File Storage). Visit the following link to see my Web Desktop Platform designed for slower Pis over here: https://github.com/tobychui/ArOZ-Online-System Hardware Requirement Raspberry Pi Model A (Pi 1 Model A or Pi 3 Model A) USB2.0 to Ethernet Adapter SD card (For installing Raspbian / Raspberry Pi OS + Storage) You can purchase a USB to 2.1mm DC power cable for the 2.1mm DC jack or you can make good use of the remaining space behind the DC jack to put a build in voltage regulator that convert 12v power input to 5V and connects to the GPIO of the pi for powering. It is up to you :))

Bu model hakkında

Tiny NAS Case for Raspberry Pi Model A, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller