Honda Civic Accessory plate

Beschreibung

A coworker wanted to add a toggle switch for his fog lights. He didn't want to just drill through his stock one. So I borrowed the original and modeled a replacement in Fusion 360. Print in PET-G or ABS for car use. PLA will melt. PET-G may get soft over the years, but will hold up better. This is currently untested, and will be checked in the next few days. use a thick layer height as the first layer is the only one you'll see when its installed and PET-G will bond better with thicker layers. You'll need supports for the flexible arms. Print orientation: face side down. rotate STL 90 degrees to have the large flat side down.