简介
A coworker wanted to add a toggle switch for his fog lights. He didn't want to just drill through his stock one. So I borrowed the original and modeled a replacement in Fusion 360. Print in PET-G or ABS for car use. PLA will melt. PET-G may get soft over the years, but will hold up better. This is currently untested, and will be checked in the next few days. use a thick layer height as the first layer is the only one you'll see when its installed and PET-G will bond better with thicker layers. You'll need supports for the flexible arms. Print orientation: face side down. rotate STL 90 degrees to have the large flat side down.
About this model
Honda Civic Accessory plate is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
