GepRc Mark 5 print set

GepRc Mark 5 print set

Kostenlos STL Fahrzeuge
  • 16 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

GepRc Mark 5 prints These were designed with weight savings in mind with also increasing protection. Skids and bumper have been designed to use the PS-3 spacers Quadmula sells (linked below) allowing the bolts to be fully tightened reducing noise in the frame. I have also included 3mm versions that do not use the spacers. Cap mount fits a 35v 1000uf capacitor and bolts in font with m2 hardware ELRS mount was designed for the Radiomaster RP1 receiver Walksnail Stubby fits the standard antenna but the tube must be trimmed, I accomplished this using a small pair of side cutters. https://quadmula.com/products/ps-3-profile-spacer

About this model

GepRc Mark 5 print set is a kostenlos 3D model in the Fahrzeuge category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle