简介
GepRc Mark 5 prints These were designed with weight savings in mind with also increasing protection. Skids and bumper have been designed to use the PS-3 spacers Quadmula sells (linked below) allowing the bolts to be fully tightened reducing noise in the frame. I have also included 3mm versions that do not use the spacers. Cap mount fits a 35v 1000uf capacitor and bolts in font with m2 hardware ELRS mount was designed for the Radiomaster RP1 receiver Walksnail Stubby fits the standard antenna but the tube must be trimmed, I accomplished this using a small pair of side cutters. https://quadmula.com/products/ps-3-profile-spacer
About this model
GepRc Mark 5 print set is a 免费 3D model in the 交通工具 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
