Air 2

Air 2

Kostenlos STL Sonstiges
  • 13 Aufrufe

Dieses Modell wird auf Cults3D gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Cults3D ansehen ↗

Beschreibung

MORE PRINT VOLUME: Increased the lateral separation of 234 mm to 250 mm. It has moved 10 mm heated platform down. The resulting print volume depends on the platform and the extruder that we place but you can easily get a size bigger than 190 x 190 x 100 mm. MORE ROBUST: The thickness of the acrylic has risen to 6 mm. The introduction of a crosspiece to give more rigidity. In the attachment points of the rods can be placed brimmed washers (DIN9021). DESING MADE CONSIDERING THE WIRING: The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above. Parts acrylic have holes or slots provided for wiring. ACKNOWLEDGEMENTS: Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO. SPANISH VERSION AT: http://reprap.org/wiki/PrusaAire#PRUSAAIR2.2CRedise.C3.B1o

About this model

Air 2 is a kostenlos 3D model in the Sonstiges category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Ähnliche Modelle