Air 2

Ücretsiz STL Diğer

14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

MORE PRINT VOLUME: Increased the lateral separation of 234 mm to 250 mm. It has moved 10 mm heated platform down. The resulting print volume depends on the platform and the extruder that we place but you can easily get a size bigger than 190 x 190 x 100 mm. MORE ROBUST: The thickness of the acrylic has risen to 6 mm. The introduction of a crosspiece to give more rigidity. In the attachment points of the rods can be placed brimmed washers (DIN9021). DESING MADE CONSIDERING THE WIRING: The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above. Parts acrylic have holes or slots provided for wiring. ACKNOWLEDGEMENTS: Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO. SPANISH VERSION AT: http://reprap.org/wiki/PrusaAire#PRUSAAIR2.2CRedise.C3.B1o

Bu model hakkında

Air 2, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.