Infinity Command Panel & Trays

Beschreibung

This design is based on the “Infinity Command Panel + Essentials Container” on MakerWorld: https://makerworld.com/en/models/767409-infinity-command-panel-essentials-container#profileId-702775 I recommend checking out the original creator’s files as well, there are several well-thought-out storage solutions and other useful companion parts that integrate nicely within his system. However, due to differences in geometry, those parts will likely not be directly compatible with my version without modification. I found the STL files online, but I wanted full control over dimensions and details. For that reason, I quickly rebuilt the system as solids, properly editable parts. This was a short project, so there is still plenty of room for refinement. Tokens The trays are sized for Micro Art Studio 15 mm Infinity tokens: https://shop.microartstudio.com/en/infinity/1748-n5-infinity-tokens-starter-set-50-green.html The tokens were magnetized using self-adhesive neodymium magnets (8.0 × 0.75 mm, N35): https://www.magnet-shop.net/neodym-magnete/selbstklebende-magnete/scheibenmagnet-8.0-x-0.75-mm-n35-nickel-selbstklebend Tray-to-tray connections To connect individual trays, I used glued-in neodymium disc magnets (4.0 × 2.0 mm, N40): https://www.magnet-shop.net/neodym-magnete/scheibenmagnete/scheibenmagnet-4.0-x-2.0-mm-n45-nickel-haelt-450-g Be careful to keep polarity consistent across all trays before gluing. Base plate As a base, I used a leftover 0.8 mm metal sheet, laminated on both…