简介
This design is based on the “Infinity Command Panel + Essentials Container” on MakerWorld: https://makerworld.com/en/models/767409-infinity-command-panel-essentials-container#profileId-702775 I recommend checking out the original creator’s files as well, there are several well-thought-out storage solutions and other useful companion parts that integrate nicely within his system. However, due to differences in geometry, those parts will likely not be directly compatible with my version without modification. I found the STL files online, but I wanted full control over dimensions and details. For that reason, I quickly rebuilt the system as solids, properly editable parts. This was a short project, so there is still plenty of room for refinement. Tokens The trays are sized for Micro Art Studio 15 mm Infinity tokens: https://shop.microartstudio.com/en/infinity/1748-n5-infinity-tokens-starter-set-50-green.html The tokens were magnetized using self-adhesive neodymium magnets (8.0 × 0.75 mm, N35): https://www.magnet-shop.net/neodym-magnete/selbstklebende-magnete/scheibenmagnet-8.0-x-0.75-mm-n35-nickel-selbstklebend Tray-to-tray connections To connect individual trays, I used glued-in neodymium disc magnets (4.0 × 2.0 mm, N40): https://www.magnet-shop.net/neodym-magnete/scheibenmagnete/scheibenmagnet-4.0-x-2.0-mm-n45-nickel-haelt-450-g Be careful to keep polarity consistent across all trays before gluing. Base plate As a base, I used a leftover 0.8 mm metal sheet, laminated on both…
About this model
Infinity Command Panel & Trays is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
