Drill Press, Column Drill

Beschreibung

Hello, I hope you are doing well. The provided file contains the parts required to build a drill press. This drill press allows better controllability along the Z-axis movement and gives you precise control over the feed rate during drilling operations. Several images are included in the file to guide the assembly process. In addition, a text file is provided that explains the construction steps in detail. The additional components that need to be purchased separately are listed below: ^_^ Two 608 bearings A 16 mm shaft with a length of your choice One 8 mm threaded rod or lead screw with a desired pitch and a length at least 10 cm longer than the shaft Shaft holder according to the provided file One linear bearing according to the part provided in the file Seven M8 nuts (if using a threaded rod) Two M8 coupling nuts Two M8 bolts with a length of 1 to 2 cm One M6 rod with a desired length for the handle Five M4 bolts with a length of 1 cm Two M4 bolts with a length of 3 cm Some concrete or white cement along with wire mesh