説明
Hello, I hope you are doing well. The provided file contains the parts required to build a drill press. This drill press allows better controllability along the Z-axis movement and gives you precise control over the feed rate during drilling operations. Several images are included in the file to guide the assembly process. In addition, a text file is provided that explains the construction steps in detail. The additional components that need to be purchased separately are listed below: ^_^ Two 608 bearings A 16 mm shaft with a length of your choice One 8 mm threaded rod or lead screw with a desired pitch and a length at least 10 cm longer than the shaft Shaft holder according to the provided file One linear bearing according to the part provided in the file Seven M8 nuts (if using a threaded rod) Two M8 coupling nuts Two M8 bolts with a length of 1 to 2 cm One M6 rod with a desired length for the handle Five M4 bolts with a length of 1 cm Two M4 bolts with a length of 3 cm Some concrete or white cement along with wire mesh
About this model
Drill Press, Column Drill is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
