Lamp Eclipse - db architecture

Lamp Eclipse - db architecture

Kostenlos STL Haus & Wohnen
  • 14 Aufrufe

Dieses Modell wird auf Creality Cloud gehostet. Dateien, Bilder und Lizenzangaben gehören dem ursprünglichen Designer.

Auf Creality Cloud ansehen ↗

Beschreibung

Design ConceptThis is an original ALOOM 3D-printable table lamp featuring a twist-lock lampshade and an internal cable-lock system. The design focuses on clean form, easy assembly, and soft light diffusion, especially when printed in matte filament.Developed and tested on the Creality K1 Max, the STL files are compatible with most standard FDM 3D printers.Print SettingsMaterial: PLA / PLA+ / Matte PLA (recommended)Layer Height: 0.2 mmWalls: 2Infill: 10–15%Supports: Not requiredBrim: OptionalFor best results, use matte filament and slower outer wall speeds for the lampshade.AssemblyThis model requires basic electrical assembly using a standard E27 lamp holder.Please refer to the included Assembly and Printing Instructions (PDF) for detailed, step-by-step guidance.Only low-heat LED bulbs are recommended.Additional NotesDesigned for indoor useOptimised for efficient printingCompatible with most FDM printersTest-fit parts before final assembly

About this model

Lamp Eclipse - db architecture is a kostenlos 3D model in the Haus & Wohnen category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

Ähnliche Modelle