Lamp Eclipse - db architecture

Lamp Eclipse - db architecture

無料 STL ホーム・リビング
  • 12 閲覧

このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Creality Cloud で見る ↗

説明

Design ConceptThis is an original ALOOM 3D-printable table lamp featuring a twist-lock lampshade and an internal cable-lock system. The design focuses on clean form, easy assembly, and soft light diffusion, especially when printed in matte filament.Developed and tested on the Creality K1 Max, the STL files are compatible with most standard FDM 3D printers.Print SettingsMaterial: PLA / PLA+ / Matte PLA (recommended)Layer Height: 0.2 mmWalls: 2Infill: 10–15%Supports: Not requiredBrim: OptionalFor best results, use matte filament and slower outer wall speeds for the lampshade.AssemblyThis model requires basic electrical assembly using a standard E27 lamp holder.Please refer to the included Assembly and Printing Instructions (PDF) for detailed, step-by-step guidance.Only low-heat LED bulbs are recommended.Additional NotesDesigned for indoor useOptimised for efficient printingCompatible with most FDM printersTest-fit parts before final assembly

About this model

Lamp Eclipse - db architecture is a 無料 3D model in the ホーム・リビング category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

類似モデル