Mold for pots

Beschreibung

Create your cement mastic from a mold designed so that the mold lines are not noticeable in the final result as they are part of the design. For casting use a quick-setting cement. https://www.homedepot.com.mx/p/rapid-set-cement-all-multiusos-gris-25-kg-cement-all-119883?storecode=8724&gadsource=1&gclid=CjwKCAjwxNW2BhAkEiwA24Cm9AUgLYQ7w0iu93j7EeCLS8OhmG9LoD0uuo9tg9fTOIrWmum4fqtvBRoCzdkQAvD_BwE&gclsrc=aw.ds For color use the following pigment. https://www.homedepot.com.mx/p/uniblock-color-para-cemento-negro-de-1-kg-399128-399128?storecode=8724&gadsource=1&gclid=CjwKCAjwxNW2BhAkEiwA24Cm9H4cHybcU2TX1PiRGWn52acUdyAlpz6IKkniD2MBRqDA1qaGYU8xoCbREQAvD_BwE&gclsrc=aw.ds Before casting, the mold parts should be coated on the inside with petroleum jelly to prevent the cement from sticking to the mold. It is also recommended to reinforce the parts with rubber bands to prevent material leakage. If the recommended cement is used, then it should be demolded 15 minutes after pouring since if more time is allowed to elapse there is a risk that the parts may no longer be able to be demolded or may break.