説明
Create your cement mastic from a mold designed so that the mold lines are not noticeable in the final result as they are part of the design. For casting use a quick-setting cement. https://www.homedepot.com.mx/p/rapid-set-cement-all-multiusos-gris-25-kg-cement-all-119883?storecode=8724&gadsource=1&gclid=CjwKCAjwxNW2BhAkEiwA24Cm9AUgLYQ7w0iu93j7EeCLS8OhmG9LoD0uuo9tg9fTOIrWmum4fqtvBRoCzdkQAvD_BwE&gclsrc=aw.ds For color use the following pigment. https://www.homedepot.com.mx/p/uniblock-color-para-cemento-negro-de-1-kg-399128-399128?storecode=8724&gadsource=1&gclid=CjwKCAjwxNW2BhAkEiwA24Cm9H4cHybcU2TX1PiRGWn52acUdyAlpz6IKkniD2MBRqDA1qaGYU8xoCbREQAvD_BwE&gclsrc=aw.ds Before casting, the mold parts should be coated on the inside with petroleum jelly to prevent the cement from sticking to the mold. It is also recommended to reinforce the parts with rubber bands to prevent material leakage. If the recommended cement is used, then it should be demolded 15 minutes after pouring since if more time is allowed to elapse there is a risk that the parts may no longer be able to be demolded or may break.
About this model
Mold for pots is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
