Spice Rack Pullout - taller

Beschreibung

This remix is to extend the height of the print and make it all a little taller for my cabinet. You will still need files from the original design, and then this remix can be used to simply replace the top and bottom shelves, and the bottom rail pieces. Any one of these pieces can be used, or all three The bottom shelf is 1 inch taller, and the short shelf is 1/2 inch taller. I also added 5mm thickness to the bottom of the bottom rails so that the slide out top rails would clear the 1/4 inch high lip at the front of my cabinets. I'll post a make later, once I've printed it all and installed it.