简介
This remix is to extend the height of the print and make it all a little taller for my cabinet. You will still need files from the original design, and then this remix can be used to simply replace the top and bottom shelves, and the bottom rail pieces. Any one of these pieces can be used, or all three The bottom shelf is 1 inch taller, and the short shelf is 1/2 inch taller. I also added 5mm thickness to the bottom of the bottom rails so that the slide out top rails would clear the 1/4 inch high lip at the front of my cabinets. I'll post a make later, once I've printed it all and installed it.
About this model
Spice Rack Pullout - taller is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
