Chocobo - SpedTeachUSMC
- 12 views
This model is hosted on Creality Cloud. Files, images and license details belong to the original creator.
View on Creality Cloud ↗Description
Layer Settings:Layer Height: 0.12 mm (best detail for feathers)Initial Layer Height: 0.20 mmLine Width: 0.40 mm (standard nozzle)If your printer is very dialed in you can go:0.08 mm layer height for ultra detailWall / Shell Settings:These help preserve the feather texture.Walls: 3Wall Thickness: 1.2 mmTop Layers: 5Bottom Layers: 5Infill:Infill: 12–15%Pattern: Gyroid or GridSupports:Supports will mainly be needed under:Tail feathersSaddle bagsBelly areaRecommended:Support Type: Tree SupportsPlacement: Build Plate OnlyOverhang Angle: 50°Support Density: 10–12%Tree supports reduce scarring on feathers.Temperature:Typical PLA values:Nozzle: 200–210°CBed: 55–60°CIf feathers string slightly → lower temperature 5°C.Speed:Print Speed: 45 mm/sOuter Wall Speed: 25 mm/sInner Wall Speed: 40 mm/sTravel Speed: 150 mm/s
About this model
Chocobo - SpedTeachUSMC is a free 3D model in the Other category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
