Chocobo - SpedTeachUSMC
- 16 閲覧
このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Creality Cloud で見る ↗説明
Layer Settings:Layer Height: 0.12 mm (best detail for feathers)Initial Layer Height: 0.20 mmLine Width: 0.40 mm (standard nozzle)If your printer is very dialed in you can go:0.08 mm layer height for ultra detailWall / Shell Settings:These help preserve the feather texture.Walls: 3Wall Thickness: 1.2 mmTop Layers: 5Bottom Layers: 5Infill:Infill: 12–15%Pattern: Gyroid or GridSupports:Supports will mainly be needed under:Tail feathersSaddle bagsBelly areaRecommended:Support Type: Tree SupportsPlacement: Build Plate OnlyOverhang Angle: 50°Support Density: 10–12%Tree supports reduce scarring on feathers.Temperature:Typical PLA values:Nozzle: 200–210°CBed: 55–60°CIf feathers string slightly → lower temperature 5°C.Speed:Print Speed: 45 mm/sOuter Wall Speed: 25 mm/sInner Wall Speed: 40 mm/sTravel Speed: 150 mm/s
About this model
Chocobo - SpedTeachUSMC is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
