Pikachu Volt Tackle - Perfetti
- 11 views
This model is hosted on Creality Cloud. Files, images and license details belong to the original creator.
View on Creality Cloud ↗Description
Simply a dynamic Pikachu performing a volt tackle, the model stands on 1 single leg thanks to the lightning bolts. As a reference, the model in the photos is a 4cm tall miniature, hollowed out with a 3mm wall and without infill. It is designed to be hand painted.The print is quite simple, it can be done either all assembled or separately, on the bed or elevated, as long as standing with its respective supports under the model to not lose the details.Printer: Creality LD-002R LCDResin: Creality water washable resin plusSlicer software: Chitubox basicPrinting parameters:Layer Height 0.05mmBottom Layer Count 5Exposure Time 5.5sBottom exposure time: 25sRest time before lift 1sRest time after lift 0sRest time after retract 2sBottom Lift Distance 2,5mm + 2,5mmLifting Distance 2,5mm + 2,5mmBottom retract distance 3,5mm + 1,5 mmRetract distance 3,5mm + 1,5mmBottom Lift Speed 65mm/min & 250mm/minLifting Speed 65 mm/min & 400mm/minBottom retract Speed 450mm/min & 150mm/minRetract speed 450mm/min & 150mm/min
About this model
Pikachu Volt Tackle - Perfetti is a free 3D model in the Other category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
