Pikachu Volt Tackle - Perfetti

Açıklama

Simply a dynamic Pikachu performing a volt tackle, the model stands on 1 single leg thanks to the lightning bolts. As a reference, the model in the photos is a 4cm tall miniature, hollowed out with a 3mm wall and without infill. It is designed to be hand painted.The print is quite simple, it can be done either all assembled or separately, on the bed or elevated, as long as standing with its respective supports under the model to not lose the details.Printer: Creality LD-002R LCDResin: Creality water washable resin plusSlicer software: Chitubox basicPrinting parameters:Layer Height 0.05mmBottom Layer Count 5Exposure Time 5.5sBottom exposure time: 25sRest time before lift 1sRest time after lift 0sRest time after retract 2sBottom Lift Distance 2,5mm + 2,5mmLifting Distance 2,5mm + 2,5mmBottom retract distance 3,5mm + 1,5 mmRetract distance 3,5mm + 1,5mmBottom Lift Speed 65mm/min & 250mm/minLifting Speed 65 mm/min & 400mm/minBottom retract Speed 450mm/min & 150mm/minRetract speed 450mm/min & 150mm/min