Label Roller for 3d printer

Description

This 3d model will need the following to work properly: Print both top and bottom of the model You will need to add one small bolt, washer, nut. Add the bolt & washer to middle of the print, make sure it's long enough to pass through the bottom. Once the bolt is through the bottom add the nut to lock bolt in place. Attach and glue 4 (10x2mm) magnets to the top and put another 4 magnets with glue to the bottom. Handheld drill, attach the handheld drill to bolt so the model spins. Once labels start to print tape first label to roller. Once first label is attached to roller use drill to slowly spin.