Rugged Enclosure for Meshcore / Meshtastic Node

Description

Rugged Enclosure for Meshcore / Meshtastic Node (XIAO nRF52840 & Wio-SX1262)This is a compact, rugged enclosure designed specifically for a DIY Meshcore or Meshtastic node. Perfect for backpacking, off-grid communication, and trekking.Hardware Compatibility:** Tailored precisely to fit the Seeed Studio XIAO nRF52840 combined with the Wio-SX1262 LoRa module.Power System: Dedicated space for a large 2000mAh LiPo batterHardware Power Switch:Includes a cutout for a physical slide switch on the side to fully cut power and prevent battery drain during storage.Interchangeable Backplates (Two Options Included):Flat Backplate: Clean, minimal back for pocket or desk use Strap-Mount Backplate: Integrated slot to thread backpack strapsshowen with flexible, whip antennas that bend out of the way when hitting branches or obstacles.Technical Specifications & Bill of Materials (BOM)Microcontroller:*Seeed Studio XIAO nRF52840LoRa Module: Wio-SX1262Battery: 2000mAh 3.7V LiPo batteryAntenna Connector: U.FL to SMA pigtailFasteners: 8 x Small corner screws (M2 / M2.5 depending on your print tolerances)Switch: Standard mini slide switch3D Printing Settings (Recommended)Material: PETG or ASAinfill: 20% to 30% (Rectilinear or Gyroid for strength).Perimeters/Walls:** 3 vertical shells minimum.Supports: for the main body