Rugged Enclosure for Meshcore / Meshtastic Node
- 32 次浏览
该模型托管于 Thingiverse。文件、图片及许可信息归原创作者所有。
在 Thingiverse 查看 ↗简介
Rugged Enclosure for Meshcore / Meshtastic Node (XIAO nRF52840 & Wio-SX1262)This is a compact, rugged enclosure designed specifically for a DIY Meshcore or Meshtastic node. Perfect for backpacking, off-grid communication, and trekking.Hardware Compatibility:** Tailored precisely to fit the Seeed Studio XIAO nRF52840 combined with the Wio-SX1262 LoRa module.Power System: Dedicated space for a large 2000mAh LiPo batterHardware Power Switch:Includes a cutout for a physical slide switch on the side to fully cut power and prevent battery drain during storage.Interchangeable Backplates (Two Options Included):Flat Backplate: Clean, minimal back for pocket or desk use Strap-Mount Backplate: Integrated slot to thread backpack strapsshowen with flexible, whip antennas that bend out of the way when hitting branches or obstacles.Technical Specifications & Bill of Materials (BOM)Microcontroller:*Seeed Studio XIAO nRF52840LoRa Module: Wio-SX1262Battery: 2000mAh 3.7V LiPo batteryAntenna Connector: U.FL to SMA pigtailFasteners: 8 x Small corner screws (M2 / M2.5 depending on your print tolerances)Switch: Standard mini slide switch3D Printing Settings (Recommended)Material: PETG or ASAinfill: 20% to 30% (Rectilinear or Gyroid for strength).Perimeters/Walls:** 3 vertical shells minimum.Supports: for the main body
About this model
Rugged Enclosure for Meshcore / Meshtastic Node is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
