Foldable Grimdark layouts Ruins - Necromaton by Tinker Junkie

Description

⚠️ Make sure your printer has a printing volume of at least 170x175x191mm to make sure you can print the files! (Bambulab A1, P1S and Ender3 are fine). A1 Mini will only work if you downscale the stls by 95%. You'd need to downscale all files, otherwise the pieces might not fit together. Come say hi to our discord server or ask any questions about the files: Discord Invite Find the instructions for setting up your tables for balanced play with this terrain set: Instructions & Print Recipe DISCLAIMER: for this print, having tight tollerances is crucial, if you are not sure if you can print print-in-place mechanisms, check the CALIBRATION FILE. ⚠️ Non-manifold / floating regions warning The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual. This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality. The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechanism, so they do not need supports. ⚠️ About the colour-separated files The files are kept colour-separated on purpose. Most slicers allow you to combine or merge the parts into a single object for printing. If…