Simple First Layer Test - Flashforge Creator Pro
- 13 views
This model is hosted on Cults3D. Files, images and license details belong to the original creator.
View on Cults3D ↗Description
A simple and quick first layer test for FlashForge's Creator Pro. Line width test print : 0.8 mm Height : 1 mm Area test print : maximum circa 125mm x 220 mm Nozzle standard diameter: 0.4 mm As always, the width of the line should be the same everywhere after the first complete layer. The area in the middle should not have too deep grooves and should adhere well. After the leveling process, start the test print and possibly readjust the build plate accordingly. In principle, printing can be stopped after the first complete layer. Flashprint: 2 outer contours, (no filling required). Enable pre-extrusion :-)
About this model
Simple First Layer Test - Flashforge Creator Pro is a free 3D model in the Other category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
