Simple First Layer Test - Flashforge Creator Pro

Açıklama

A simple and quick first layer test for FlashForge's Creator Pro. Line width test print : 0.8 mm Height : 1 mm Area test print : maximum circa 125mm x 220 mm Nozzle standard diameter: 0.4 mm As always, the width of the line should be the same everywhere after the first complete layer. The area in the middle should not have too deep grooves and should adhere well. After the leveling process, start the test print and possibly readjust the build plate accordingly. In principle, printing can be stopped after the first complete layer. Flashprint: 2 outer contours, (no filling required). Enable pre-extrusion :-)