説明
Updates: 1- Added the stiffer model again, as it is just as useful. Also added the STEP file in case you want to edit it. Here is a quick video on this: Simple little sanding bow for 25mm wide sanding belt strips. You will need two carriage bolts M5 and two wing nuts. Hmm, never mind, this was not a good design. So, now I have uploaded the correct design. Did some calculations on it, make a model, tested it and it works. https://youtu.be/BlSMMxcIpFc You need 2 M5x30 carriage bolts, 2 washers and 2 M5 wing nuts. The belt is 25 mm wide belt, I tear strips off of a 2-inch wide belt.
About this model
Sanding Bow is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
