説明
I made this to build a printer stand with leftover 1/2 plywood I had. It is made to fit #8-32 1" inch flat-head screws and associated washers and lock nuts (8 of each). I also added castors from a moveable clothing rack that my wife bought, but didn't install. Cut the plywood to desired size x2. Attach all the corners, they are all the same direction. Drill 4mm holes into the plywood where the screws go, Assemble both layers together with the 4 posts. add small clothing rack casters for mobility.
About this model
Printer Stand Hardware is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
類似モデル
無料
Cooler Can Holder (std 12oz can)
無料
Bottlecap Shoot for Different Beer Bottles
無料
Ikea 365+ Plastic Lid Hanger / Organizer
無料
Toothpick dispenser - fully printed (v2)
無料
USB cable organizer Box tray IPhone Samsung
無料
No-Slip Bed Sheet Lock
無料
Big screwdriver holder, honeycomb pattern / Velký držák na šroubováky
無料