Printer Stand Hardware

Printer Stand Hardware

免费 STL 数码配件
  • 15 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

I made this to build a printer stand with leftover 1/2 plywood I had. It is made to fit #8-32 1" inch flat-head screws and associated washers and lock nuts (8 of each). I also added castors from a moveable clothing rack that my wife bought, but didn't install. Cut the plywood to desired size x2. Attach all the corners, they are all the same direction. Drill 4mm holes into the plywood where the screws go, Assemble both layers together with the 4 posts. add small clothing rack casters for mobility.

About this model

Printer Stand Hardware is a 免费 3D model in the 数码配件 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型