説明
A light duty folding utility knife. Great build by PvtDBJackson. Clip omitted. Modified some of the dimensions so my printer would give the least amount of cleanup. Print optimized for 100% speed @50% infill,3,6,6. Print time 1hr:24m. Shorter print time will made a tighter fit, where as a longer print time will provide more clearance. I removed large yellow support with a small screw driver. A cutoff wheel in a rotary tool will remove the smaller support. Run a utility knife around the adjoining surfaces to break them loose. Slight twisting of the build will help. Work the latch until it moves freely with a nice crisp snap when fully opened. Push the blade in and secure with a 3x4mm cap screw on one side with a 3x7mm on the other. Smooth the edges with a file & emery cloth. Build is for a right handed person. A mirror image should provide a left handed build. Be careful not to cut your self in the cleanup process. Full instruction can be found at: http://www.thingiverse.com/thing:1298487
About this model
Folding Utility Knife is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
