Protractor-Angle Checker
- 25 閲覧
このモデルは Thingiverse で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Thingiverse で見る ↗説明
There are two kinds to choose from.Print the pdf file with the protractor with out any scaling and it should fit the printed base. Cut out and glue to the base. Layer on top of it with clear tape if like. Contact glue works great.Bend the pointer up where the printed marks are on it. May cut it off and use tape so it will hinge well. I used contact glue and a piece of cloth. The cloth will last forever.Hardest part is cutting out the pdf and glueing it to the base. Use a standard square or known perfect square in lining up.Check out also my other design.https://www.thingiverse.com/thing:7379117Should print fine.Enjoy, Rick.
About this model
Protractor-Angle Checker is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
