Qidi Max4 Second Camera for D3P Riser
- 24 閲覧
このモデルは Thingiverse で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Thingiverse で見る ↗説明
This print permits you to mount a second inexpensive wide angle camera into the D3P riser for the Qidi Max4.(See: https://cults3d.com/en/3d-model/tool/d3p-riser-for-qidi-max-4 )The mount is printed in two parts that are glued together after printing and installing the inserts.The base replaces one of the clips used to assemble the riser's frame.The camera case stand is affixed to the mount using M3 screws threaded into M3x6x5 heat inserts.The base is held in place against the weight of the camera, by looping the USB cable under the riser top and/or affixing the cable loops with a wire tie.
About this model
Qidi Max4 Second Camera for D3P Riser is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
